参考文献

[1]　Stamenkovic V R,Strmcnik D,Lopes P P,et al.Energy and fuels from electrochemical interfaces.Nat Mater,2016,16(1):57⁃69.

[2]　Nishida R T,Beale S B,Pharoah J G,et al.Three⁃dimensional computational fluid dynamics modelling and experimental validation of the Jülich Mark⁃F solid oxide fuel cell stack.Journal of Power Sources,2018,373:203⁃210.

[3]　Chen D F,Lin Z J,Zhu H Y,Kee R J.Percolation theory to predict effective properties of solid oxide fuel⁃cell composite electrodes.J Power Sources,2009,191:240⁃252.

[4]　Papurello D,Lanzini A,Tognana L,et al.Waste to energy:exploitation of biogas from organic waste in a 500 Wel solid oxide fuel cell(SOFC) stack.Energy,2015, 85:145⁃158.

[5]　Ai N,Lu Z,Tang J K,et al.Improvement of output performance of solid oxide fuel cell by optimizing Ni/samaria⁃doped ceria anode functional layer.Journal of Power Sources,2008, 185(1):153⁃158.

[6]　White B M,Lundberg W L,Pierre J F.Accomplishments, status, and roadmap for the US Department of Energy’s Fossil Energy SOFC program, ECS Trans,68(2015):23⁃38.

[7]　Zhao F,Virkar A V.Dependence of polarization in anode⁃supported solid oxide fuel cells on various cell parameters.Journal of Power Sources,2005, 141(1):79⁃95.

[8]　Sunde S.Calculation of Conductivity and Polarization Resistance of Composite SOFC Electrodes from Random Resistor Networks.Journal of the Electrochemical Society,1995, 142(4):L50⁃L52.

[9]　Kenjo T,Osawa S,Fujikawa K. High⁃Temperature Air Cathodes Containing Ion Conductive Oxides.Journal of the Electrochemical Society,1991, 138(2):349⁃355.

[10]　Joshi A S,Grew K N,Izzo Jr J R,et al.Lattice Boltzmann Modeling of Three⁃Dimensional, Multicomponent Mass Diffusion in a Solid Oxide Fuel Cell Anode.Journal of Fuel Cell Science and Technology,2010, 7:011006.

[11]　Kenney B,Valdmanis M,Baker C,et al.Computation of TPB length, surface area and pore size from numerical reconstruction of composite solid oxide fuel cell electrodes.Journal of Power Sources,2009, 189(2):1051⁃1059.

[12]　Wilson J R,Kobsiriphat W,Mendoza R,et al.Three⁃dimensional reconstruction of a solid⁃oxide fuel⁃cell anode.Nature Materials,2006, 5(7):541⁃544.

[13]　Blum L,Meulenberg W A,Nabielek H,et al.Worldwide SOFC technology overview and benchmark.International Journal of Applied Ceramic Technology,2005, 2(6):482⁃492.

[14]　Hirata H,Hori M.Gas⁃flow uniformity and cell performance in a molten carbonate fuel cell stack.Journal of Power Sources,1996, 63(1):115⁃120.

[15]　Yoshida H,Yakabe H,Ogasawara K,et al.Development of envelope⁃type solid oxide fuel cell stacks.Journal of Power Sources,2006, 157(2):775⁃781.

[16]　Duquette J,Petric A.Silver wire seal design for planar solid oxide fuel cell stack.Journal of Power Sources,2004, 137:71⁃75.

[17]　Chyou Y P,Chung T D,Chen J S,et al.Integrated thermal engineering analyses with heat transfer at periphery of planar solid oxide fuel cell.Journal of Power Sources,2005, 139(1⁃2):126⁃140.

[18]　Steinberger⁃Wilckens R.In Overview of Solid Oxide Fuel Cell Development at FZJ, Fundamentals and Developments of Fuel Cell Conference 2008, Nancy, France, 10⁃12.Dec.2008.

[19]　Chen D,Zeng Q,Su S,et al.Geometric optimization of a 10⁃cell modular planar solid oxide fuel cell stack manifold.Applied Energy,2013, 112:1100⁃1107.

[20]　Wei S S,Wang T H,Wu J S.Numerical modeling of interconnect flow channel design and thermal stress analysis of a planar anode⁃supported solid oxide fuel cell stack.Energy,2014, 69:553⁃561.

[21]　Jung H,Choi S,Kim H,et al.Fabrication and performance evaluation of 3⁃cell SOFC stack based on planar 10cm×10cm anode⁃supported cells.Journal of Power Sources,2006, 159(1):478⁃483.

[22]　Bi W,Chen D,Lin Z.A key geometric parameter for the flow uniformity in planar solid oxide fuel cell stacks. International Journal of Hydrogen Energy,2009, 34(9):3873⁃3884.

[23]　Yokoo M,Tabata Y,Yoshida Y,et al.Highly efficient and durable anode⁃supported SOFC stack with internal manifold structure.Journal of Power Sources,2008, 178(1):59⁃63.

[24]　Jin L,Guan W,Niu J, et al.Effect of contact area and depth between cell cathode and interconnect on stack performance for planar solid oxide fuel cells.Journal of Power Sources,2013, 240(0):796⁃805.

[25]　Lindermeir A,Immisch C,Szepanski C,et al.New SOFC⁃Stack Design with Parallel⁃Connected Cells ⁃ Basic Concept and Joining Aspects.Fuel Cells,2015, 15(5):703⁃710.

[26]　Dong S K,Jung W N,Rashid K,et al.Design and numerical analysis of a planar anode⁃supported SOFC stack.Renewable Energy,2016, 94:637⁃650.

[27]　Kee R J,Korada P,Walters K,et al.A generalized model of the flow distribution in channel networks of planar fuel cells.Journal of Power Sources,2002, 109(1):148⁃159.

[28]　Su A,Weng F B,Hsu C Y,et al.Studies on flooding in PEM fuel cell cathode channels.International Journal of Hydrogen Energy,2006, 31(8):1031⁃1039.

[29]　Li P W,Chen S P,Chyu M K.Novel gas distributors and optimization for high power density in fuel cells.Journal of Power Sources,2005, 140(2):311⁃318.

[30]　哈尔特 N T,帕斯莱 M N,奥凯利 M J,等.固体氧化物燃料电池堆.CN1555586, 2004.

[31]　王海千,谢斌,王晓平,等.环形导体框架支撑的平板式固体氧化物燃料电池堆构建.101043083, 2007.

[32]　Barbera O,Stassi A,Sebastian D,et al.Simple and functional direct methanol fuel cell stack designs for application in portable and auxiliary power units.International Journal of Hydrogen Energy,2016, 41(28):12320⁃12329.

[33]　Park J,Bae J.Characterization of electrochemical reaction and thermo⁃fluid flow in metal⁃supported solid oxide fuel cell stacks with various manifold designs.International Journal of Hydrogen Energy,2012, 37(2):1717⁃1730.

[34]　Pohjoranta A,Halinen M,Pennanen J,et al.Solid oxide fuel cell stack temperature estimation with data⁃based modeling⁃Designed experiments and parameter identification.Journal of Power Sources,2015, 277(0):464⁃473.

[35]　Azari K,Vaghasloo Y A,Mohandesi J A,et al.The effect of cell shape on the warpage in solid oxide fuel cells.Journal of Power Sources,2015, 279(0):64⁃71.

[36]　Boersma R J,Sammes N M.Computational analysis of the gas⁃flow distribution in solid oxide fuel cell stacks.Journal of Power Sources,1996, 63(2):215⁃219.

[37]　Hirata H,Nakagaki T,Hori M.Effect of gas channel height on gas flow and gas diffusion in a molten carbonate fuel cell stack.Journal of Power Sources,1999, 83(1⁃2):41⁃49.

[38]　Hirata H,Nakagaki T,Hori M.Pressure losses at dividing and combining junctions in a molten carbonate fuel cell stack.Journal of Power Sources,2001, 102(1⁃2):118⁃123.

[39]　Maharudrayya S,Jayanti S,Deshpande A.Pressure losses in laminar flow through serpentine channels in fuel cell stacks.Journal of Power Sources,2004, 138(1):1⁃13.

[40]　Maharudrayya S,Jayanti S,Deshpande A P.Pressure drop and flow distribution in multiple parallel⁃channel configurations used in proton⁃exchange membrane fuel cell stacks.Journal of Power Sources,2006, 157(1):358⁃367.

[41]　Barreras F,Lozano A,Valio L,et al.Flow distribution in a bipolar plate of a proton exchange membrane fuel cell: experiments and numerical simulation studies.Journal of Power Sources,2005, 144(1):54⁃66.

[42]　Lin C K,Chen T T,Chyou Y P,et al.Thermal stress analysis of a planar SOFC stack.Journal of Power Sources,2007, 164(1):238⁃251.

[43]　Chen C H,Jung S P,Yen S C.Flow distribution in the manifold of PEM fuel cell stack.Journal of Power Sources,2007, 173(1):249⁃263.

[44]　Huang C M,Shy S S,Leeb C H.On flow uniformity in various interconnects and its influence to cell performance of planar SOFC.Journal of Power Sources,2008, 183:205⁃213.

[45]　Su S,He H,Chen D,et al.Flow distribution analyzing for the solid oxide fuel cell short stacks with rectangular and discrete cylindrical rib configurations.International Journal of Hydrogen Energy,2015, 40(1):577⁃592.

[46]　Blum L,Groß S M,Malzbender J,et al.Investigation of solid oxide fuel cell sealing behavior under stack relevant conditions at Forschungszentrum Jülich.Journal of Power Sources,2011, 196(17):7175⁃7181.

[47]　Peksen M.A coupled 3D thermofluid⁃thermomechanical analysis of a planar type production scale SOFC stack.International Journal of Hydrogen Energy,2011, 36(18):11914⁃11928.

[48]　Chen D F,Xu Y,Tade M O,et al.General Regulation of Air Flow Distribution Characteristics within Planar Solid Oxide Fuel Cell Stacks.ACS Energy Letters,2017:319⁃326.